At Festive Lights, unsurprisingly, we get asked lots and lots of lighting related questions; one that gets asked a lot is, how do I install my lights on a brick wall?
Well, not one to leave you in the dark (see what we did there) we thought we’d do a quick instructional video showing you exactly how to do this.
Can’t watch the video? Check out the step by step instructions below the video.
Instructions:
You’ll need yellow wall plugs, a drill with 5mm masonry bit and a dustpan & brush
Set the drill to the hammer setting. Apply firm and steady pressure to your drill, making sure you're at right angles to the wall's surface
Once the holes are drilled, insert the wall plugs. They may need a light tap with a hammer until they're flush with the wall's surface
Screw in the cup hook until tight
Hook over the light string and secure with a cable tie as required
